|
火电厂湿法烟气脱硫效率的仿真研究
程亮, 赵爱军,李庚陆,宋胜虎
(大唐武安发电有限公司,河北 邯郸 056002)
摘要:针对某火电厂 2×330MW 机组湿法烟气脱硫系统,运用微元法对系统脱硫效率进行研究,建立了脱硫效率与原烟气量、原烟气二氧化硫含量、浆液pH值、液气比之间的仿真模型。对影响湿法烟气脱硫效率进行了定量分析,对提高湿法烟气脱硫效率和降低运行费用具有指导意义。
关键词:仿真 湿法烟气脱硫 效率 火电厂
Study on Simulation of the Flue Gas Desulphrization
Efficiency in Thermal Power Plant
Cheng Liang,Zhao Ai-jun,Li Geng-lu,Song Sheng-hu
(Da tang wu’an power plant, Han Dan 056002, China)
Abstract:The paper focuses on a 2×300 MW thermal power plant’s wet flue gas desulphrization (FGD) system to carry on research work.Through the study of desulphurization eficiency by infinitesimal method,the mathematic simulation models of desulphurization eficiency with the connection of the inlet gas,SO2 in the inlet gas, pH and L/G are established.The efficiency factors of wet flue gas desulphurization are studied in various kinds of operating control parameters.The study has the instruction function to increase the flue gas dessulpurization efficiency and reduce the operation cost.
Key words:simulation wet flue gas desulphrization efficiency thermal power plant
0 引 言
目前, 在众多的脱硫工艺中,石灰石湿法烟气脱硫工艺以其技术成熟、可靠性高、操作简单、对煤种的适应性强、可同时除尘等优势成为应用最广的脱硫工艺。而脱硫效率是反映脱硫工艺水平的重要指标。因此,建立脱硫效率模型、分析影响脱硫效率的主要因素, 对于优化火电厂脱硫工艺具有重要的意义。
1 仿真模型的建立
仿真模型基于某火电厂2×330机组运行状况的数据,运用微元法对系统脱硫效率进行研究,建立了脱硫效率与原烟气量、原烟气二氧化硫含量、浆液pH值、液气比之间的仿真模型
1.1 进入吸收塔烟气量 Q
从电站锅炉出来的烟气经过除尘器进入脱硫系统,到达吸收塔时漏风率约为2%,该电厂实际调试时的烟气量为160~290 ,在仿真模型中可表达为【2】:
(1)
式(1)中,rnd1 为从0到1变化的随机函数。
1.2 烟气中SO2含量S1
锅炉燃烧排出的SO2是造成大气污染的重要因素, 基于机组运行数据,浓度范围为1600~3100 ,即仿真模型可表达为:
(2)
式(2)中,rnd2 为从0到1变化的随机函数。
CP0446_FC.doc
(147 KB, 下载次数: 1)
|
|